Clear Coat Paint

Two component, general purpose, transparent/clear air drying epoxy coating.

Features:

• General purpose clear coating for all types of painted and unpainted surfaces for protection and decoration.
• Good resistance to impact, abrasion, water & mild chemicals.

Physical Properties :

Color	Clear.
Gloss	Glossy/Eggshell/Matt.
Volume Solids	35 %(app)
Recommended DFT / coat	20 - 25 mµ(app)
Theoretical covering capacity	25 to 35 m2 /l @ 20 mµ DFT
Curing time at 30°C	Surface dry : 1 hour
	Hard dry : 16 hours
	Full cure : 7 days
Shelf life (cool & dry place)	12 months(app)
Flash point	Base : < 28°C
	Hardener : < 28°CColour

Surface preparation & Substrate Condition:

Surface must be free from rust, loose scale, mill scale, oil and all types of contamination and dry. Surface temperature must be at least 3°C above dew point but not above 50°C.

Mixing:

Stir the base and hardener separately to get an uniform mix, then add hardener slowly to the base slowly with constant stirring for quick homogenous mixing.

• Mixing ratio: Base: Hardener :: 4 :1(w/w)
• Induction time: 30 minutes
• Pot life at 30°C: 8 hours

Application:

Brush

• Recommended thinner : Vib Thinner No. 8
• Volume of thinner : 0 - 10 %

Air spray

• Recommended thinner : Vib Thinner No. 8.
• Volume of thinner : 5 - 20 %
• Nozzle orifice : 1.5 - 3.0 mm
• Nozzle pressure : 0.3 - 0.4 MPas

Airless spray

• Recommended thinner : Vib Thinner No. 8
• Volume of thinner : 0 - 15 %
• Nozzle orifice : 0.41 - 0.48 mm
• Nozzle pressure : 20 - 24 Mpas