- Liter/Liters
- 20
- Liter/Liters
- 350.00-
Zinc Chromate Primer is a compound which physically appears as a yellowish green colour solvent which is added with a pigment and number of additives. It is widely used in industrial painting as a protective coating over materials like iron or aluminium to act as a corrosion-resistant agent and ensures a longer service life to the machine and automotive components. Zinc Chromate Prime has a chemical formula of ZnCrO4 and a molar mass approximately equals to 181.403 grams per mol. It has a density of 3.43 grams per cubic centimetre and is insoluble in water.
Features of Zinc Chromate Primer
- Anti-corrosive primer for ferrous surface.
- Maximum DFT per single coat 35m per coat.
- Resists fumes of most acids, alkalis, salt solutions and corrosive gases
- Resistant to chemical & saline environments
- Resistant to dry heat 40C max.
Technical Specification of Zinc Chromate Primer
Color | Yellowish Green |
Gloss | Matt |
Volume solid | 45 %(approx). |
Recommended DFT / coat | 30 - 35m |
Drying time at 30C | Surface dry : 30 minutes |
Hard dry : 8 hours | |
Shelf life (cool & dry place) | 12 months(min) |
Flash point | <30C |
Surface Preparation & Substrate Condition
- Surface must be free from oil, dirt, mill scale and all types of contamination etc.the standard of surface should be no less than St 3.
- Non-ferrous surface, sufficiently roughened with emery paper & dry and free from all contamination.
- Substrate temperature should be at least 3C above dew point but not above 50C.
Mixing
If settling is observed in the drum, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing.
Application of Zinc Chromate Primer
Brush / Roller | |
Recommended thinner | WA Thinner No. 7 |
Volume of thinner | 0 - 10 % |
Air spray | |
Recommended thinner | WA Thinner No. 7. |
Volume of thinner | 5 - 20 % |
Nozzle orifice | 1.5 - 3.0 mm |
Nozzle pressure | 0.3 - 0.4 Mpas |
Airless spray | |
Recommended thinner | WA Thinner No. 7. |
Volume of thinner | 5 - 15 % |
Nozzle orifice | 0.38 - 0.46 mm |
Nozzle pressure | 10 13 MPas |
- Kolkata
- Telegraphic Transfer (T/T), Cheque, Cash in Advance (CID), Cash Advance (CA)
- 10000 Per Month
- 1 Week
- Yes
- Contact us for information regarding our sample policy
- As Per Buyers Requirement & Order
- All India
- ISO 9001:2008
66, Paik Para First Row Kolkata West Bengal India +918037400744
Phone :+918037400744