Zinc Phosphate Primer

Single pack, air drying, high build, chlorinated rubber based anti- corrosive primer with zinc phosphate pigment.

Features

• High build anti-corrosive primer for ferrous surface.
• Maximum DFT per single coat 75mµ per coat.
• Resists fumes of most acids, alkalis, salt solutions and corrosive gases
• Resistant to chemical & saline environments
• Resistant to dry heat 60°C max.
• Minimum application temperatures down to -10°C

Technical Specification

Surface Preparation & Substrate Condition

• Surface must be free from oil, dirt, mill scale etc. the standard of surface shou be no less than St 3.
• Non-ferrous surface, sufficiently roughened with emery paper & dry and free from all contamination.
• Substrate temperature should be at least 3°C above dew point but not above 50°C

Mixing

If settling is observed in the drum, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing.

Application